Reply To: Well, The test started out well…..but then…

Home › Forum › Ask A Member › Well, The test started out well…..but then… › Reply To: Well, The test started out well…..but then…

March 28, 2020 at 6:22 pm #198706
gjonz
Participant

    Those shock absorbers are a pest. I ALWAYS weld them and use a soft shear pin. Talk about reinventing a better mouse trap!

    Either way when the seal housing on the driveshaft was broken that causes loss of vacuum and thus water pumping would decrease. Also water can now get into the gear case a mix with the 90 wt oil causing a milkshake.

    Alternatively you could just be seeing fuel/oil/ water mix in the water from the exhaust. Depends how much.

    Barrels have nowhere to get rid of that mixture so it usually looks worse than it is.

    Greg