Reply To: Clinton K200 7106A 2 HP single cyl

Home › Forum › Ask A Member › Clinton K200 7106A 2 HP single cyl › Reply To: Clinton K200 7106A 2 HP single cyl

March 25, 2020 at 3:02 pm #198346
retiredoz
Participant

    The book calls for CJ8 or equivalent plug. Make sure your points are clean and properly gapped (.020). Move throttle off dead idle. If still nothing, check the plug wire for continuity and make sure the connector is actually connected ?

    Which carburetor do you have, the Tecumseh one with the big round bowl and an adjustment needle poking up from the center of the bowl ? If that’s the one you have, set idle screw open two turns and the high-speed 1 1/2 turns open and go from there. After you solve your spark problem.