Reply To: 75’ evinrude 15hp top crank seal

Home › Forum › Ask A Member › 75’ evinrude 15hp top crank seal › Reply To: 75’ evinrude 15hp top crank seal

March 23, 2020 at 1:17 pm #198131
johng
Participant

    US MEMBER PAY BY CHECK

    Yes, Get a Small Chisel say 4″ to 5″ long with a 1/8″ wide Flat Tip and at the outside edge of Seal start to punch it towards the Crank, working carefully not to hit the crank, moving around the Seal it will loosen by the time you are 1/2 way around seal then try to lift it out. Bingo Done it many times.