Reply To: Chrysler 1966 3.5 HP Model is 3601 need some help getting this apart

Home › Forum › Ask A Member › Chrysler 1966 3.5 HP Model is 3601 need some help getting this apart › Reply To: Chrysler 1966 3.5 HP Model is 3601 need some help getting this apart

March 22, 2020 at 4:51 am #197977
seahuntboater
Participant

    Stud nut is off. Yes 26 has got to be in there and is my problem. The housing moves on the stud slightly.
    The pinion does move up and down on the drive shaft easily so I will try wrangling it past the prop shaft bushing too.

    Maybe I can bend a pick and get at the Circlip by feel.

    thanks Frank and Fleetwin. It is so great to have the knowledge of what is holding these old motors together . As we get excited it is easy to break stuff but i am learning patience and not being afraid to ask a few questions is the way to go.

    Ralph