anything can happen with flexing wires….
why not just star from the beginning and redo the electricals …
pull the mag plate
change wires with new 7mm wire(metallic) core plug wire….. reinstall the mag plate
inspect polish clean the points and set at .020 on the high point of the cam …or invest in new ones
change the plugs and set at .030
reinstall everything check for continuity from plug booths to ground to confirm 4-7koms
condensers may be good for now….
install the flywheel , spin with a drill with plugs not installed and check for good snappy spark if bad try new condensers
Joining AOMCI has priviledges 🙂
