don’t forget to clean the 2 vent holes in the tank cap. if you look VERY closely under the cap there is a small metal disk with 2 notches
rotate the little plate and find the 2 holes aligned with the notches then run a paper clip in the 2 holes
with the cap loosened you should see light in the holes
http://www.outboard-boat-motor-repair.com/Evinrude%203%20HP%20Lightwin%20Outboard%20Boat%20Motor/Evinrude%20Johnson%203%20HP%201952-1967%20Carburetor%20Tune-UP.htm
http://www.maxrules.com/fixtuneitup.html
https://www.ebay.ca/itm/Ignition-Coil-Fits-For-Johnson-Evinrude-OMC-Replaces-584477-0584477-582995-CA-/193328227519?hash=item2d0342a4bf
btw gas filtering … you can always hook up a small paper filter on the fuel line to the carb
Joining AOMCI has priviledges 🙂
