Reply To: Help getting my 67 Evinrude 3hp started

Home › Forum › Ask A Member › Help getting my 67 Evinrude 3hp started › Reply To: Help getting my 67 Evinrude 3hp started

February 22, 2020 at 8:22 am #195602
frankr
Participant

    I would remove the flywheel for a look-see. You need a 3-bolt puller that uses the three holes at the center of the flywheel. A harmonic balancer puller from an auto parts store will work. Some stores will loan one. A torque wrench to reinstall the nut is also highly recommended. Tighten the nut to 30-40 foot pounds.