Home › Forum › Ask A Member › Seal Removal › Reply To: Seal Removal
February 15, 2020 at 11:31 pm
#194996
Here is something you can try. Get out your tin snips or aviation shears. Cut the outer edge of the seal all the way around about 1/4 or 1/8″ wide. Bend the cut pieces up or slightly over to the housing. Use a small screwdriver and hammer to bend the seal in towards the center. If it bends just a little it will come right out. Once you weaken the top of the seal. It will shrink and you will be home free! I know clear as mud!
dale