Home › Forum › Ask A Member › Remote Start 9.9/15hp OMC wiring diagram › Reply To: Remote Start 9.9/15hp OMC wiring diagram
Unfortunately all I have is the motor. I looked through some parts bins and found another one of these harnesses I had put aside before. The green wire at the motor end had, what appears to be a factory sealant on to terminate the line on it so perhaps it isnt used for anything, possibly a tach lead as you mentioned.
The green wire on the motor I am talking about terminates near the tach/yellow/grey rectifier lead but I see no evidence of it being connected to anything on the motor.
Maybe I can find a kit on ebay with the original instructions. Otherwise Ill just have to wire up a simple push button start, stop, and choke set up. Would like to have a key switch but I guess buttons would still work.