Home › Forum › Ask A Member › 2000 Johnson 50hp throttle cable hookup. › Reply To: 2000 Johnson 50hp throttle cable hookup.
February 13, 2020 at 11:36 am
#194684
Take the cable out of the fixture where the adjustment trunion sits, move the throttle to fast and align the pin and cable so you can easily install the pin from the backside using a pair of needle nose pliers or something to hold the pin, then place the keeper on the pin, push the throttle bracket back to idle and install the trunion in place. Lastly adjust the knob so the throttle assembly goes snugly against the stop when you move the shift and throttle handle.