Reply To: Lockwood 72T Coil Removal

Home › Forum › Ask A Member › Lockwood 72T Coil Removal › Reply To: Lockwood 72T Coil Removal

January 31, 2020 at 7:57 pm #193684
GARY
Participant

    US Member

    Yes,I used the same rods.You’ll use about 2/3 or less than the original coil used.Get them as evenly spaced around the long bolt and insulating tube as you can,then put some shrink tubing on the part sticking out both ends.Then you can get it back between the heels and re-install the bolt.