Tubs, a lesson you’ll not soon forget, but learned the hard way!
I use to cringe every time I went to hand crank my grandfather’s
F-12 Farmall tractor, as “kick backs” were no fun!
Mag plate is now cleaned up, and I’m awaiting advise on what
Military Surplus coil to try to obtain, and perhaps where.
I have a couple of ZongKong coils I could try, but decided
against using them on the last project, as the green Sierra coils
were apparently “better”.
For kicks, I re-tested the Eisemann coil from the Lockwood today.
Primary with the ohm meter .4 to .7, secondary, when I could get
a reading at all, it averaged around 13 k ohms.
I could get no reading on the secondary using my old analog ohm meter.
I threw it on the Stevens tester, and I did get if to fire at around 2 amps.
I’m guessing that the secondary is buggered?
Prepare to be boarded!