Home › Forum › Ask A Member › Eismann coils › Reply To: Eismann coils
January 19, 2020 at 6:32 pm
#192555
I checked the coil on the Stevens today. It fired nice at about 1.7 amps.
I’d have to look at what the specs are for that coil.
Then I went to the coil that check good on the Ohm meter,
and couldn’t get it to fire on the Stevens. Not sure what was going
on, but after about 4 tries, monkeying around, it fired at about the same
amps as the other coil.
Time will tell if Tinker is correct about the open winding!
Prepare to be boarded!