Reply To: 6039 Speeditwin Flywheel torque

Home › Forum › Ask A Member › 6039 Speeditwin Flywheel torque › Reply To: 6039 Speeditwin Flywheel torque

December 31, 2019 at 9:21 pm #190369
Bob Wight
Participant

    US Member

    If you set the crows foot wrench in a straight line with the torque wrench head then yes, it will result in a higher torque setting than what you want. The crows foot should be set 90 degrees to the torque wrench head. Here’s a video that explains it.

    https://www.youtube.com/watch?v=fBjr9-FDWYw

    Bob

    1937 Champion D2C Deluxe Lite Twin
    1954 Johnson CD-11
    1955 Johnson QD-16
    1957 Evinrude Fastwin 18
    1957 Evinrude 3022
    1958 Johnson QD-19
    1958 Johnson FD-12
    1959 Johnson QD-20
    1982 Evinrude 25hp

    “Every 20 minute job is only a broken bolt away from a 3-day project.”
    "Every time you remove a broken or seized bolt an angel gets his wings."