Re: What The Heck

[beerman57]

You can’t see up the midsection to look for the spring and snap ring, but I put the motor on my truck tailgate and tipped it so the top of the crank was a little lower than the bottom. I pulled the crank "up" and it went right back down, like a spring pulled it back, so the spring and snap ring must be intact. I also took a piece of small PVC pipe, put it up against the bottom of the crank and pulled up on the crank and the PVC went up too. So, I don’t know what’s going on with it, but the crank is in one piece and the spring and clip for the bottom seal seem to be there.