Reply To: Johnson twist grip tension problem

[drbenson-live-com]

Parts 52 and 53 are intact. The grease down in the bottom of the grip was pretty janky so I cleaned all parts in gasoline. After I reassembled, the grip seemed better and didn’t slip into SLOW when I pulled the starter rope. I checked the sinc between the throttle and cam and it seemed good; the follower contacted the cam just as the throttle began to open. It’s Christmas so it’s time to go to the neighbors for food and drink. Thanks for the advice. I’ll report after I get the time to put the motor in the tank and start it up. Merry Christmas.