Can you post a picture of the rods. Somehow I’m picturing it and if you swivel it from one side to the other the hole should still be up.
This photo shows the oil holes are on the short side of the wrist pin boss off-set.
When disassymbled, one rod had oil holes UP, the other DOWN, so I assume
with the offset that I can’t simply flip the one rod so the oil holes are then UP.
“If” I get a chance today, I’ll look it over, but Tiny Tim is coming for an early diner,
so I may be wondering aimlessly around the kitchen today.
Prepare to be boarded!