Reply To: 9.5hp plastic ring between prop and gearcase

Home › Forum › Ask A Member › 9.5hp plastic ring between prop and gearcase › Reply To: 9.5hp plastic ring between prop and gearcase

December 5, 2019 at 5:16 pm #188670
JACQUES
Participant

    gents, at 70 I known monofilament and.. believe it or not mono did not melt itself into a perfectly white ring band between the prop’s back edge and the gearcase.

    I have to conclude that if anyone on here has never seen one it must have been some kind of contraption placed there.

    Another possibility is that the prop installed on this freebie 9.5 (yes free 🙂 ) was the wrong one with it’s back edge not long enough to fill the back gap to the gearcase…so the PO installed the white spacer band ??? .

    my only beef now is that I have to wait for ice out ….in late April 🙂 to trial run my freebie.

    I’ll pull the prop and check the mdl #

    thanks all for scratching our heads 🙂

    Joining AOMCI has priviledges 🙂