Re: 1960 Evinrude 5.5 hp Fuel System

Home › Forum › Ask A Member › 1960 Evinrude 5.5 hp Fuel System › Re: 1960 Evinrude 5.5 hp Fuel System

October 17, 2015 at 12:01 am #25636
chris-p
Participant

    The routing is connector to pump….pump to filter….filter to carb.

    So 1/4" from connector to fuel pump.

    3/16" from fuel pump to filter housing, and….

    I use 3/16 from the filter housing to the carb.

    May need to hit the 3/16 going onto the fuel pump with the heat gun first. I think, and correct me if Im wrong, the original fuel pump had 2 different barbs, or no?