Reply To: MERCURY MARK 55 TIMING BELT INSTALLATION

Home › Forum › Ask A Member › MERCURY MARK 55 TIMING BELT INSTALLATION › Reply To: MERCURY MARK 55 TIMING BELT INSTALLATION

November 12, 2019 at 9:22 am #187006
John Schubert
Participant

    Lifetime Member

    just install the pulley around the pulley cogs on the flywheel & then drop the flywheel down over the crankshaft making sure the belt clears through the slots in the upper bearing carrier. Then with the arrow on the distributor aligned with the correct marking on the flywheel, align the belt over the appropriate grove in the distributor pulley & turn the flywheel until the belt is in place on the distributor pulley.