Reply To: 6039 Evinrude Speeditwin

[Buccaneer]

Thanks again for your help!
I’ve been looking at Timken CAD drawings as you suggested, etc.,
and believe I’m making progress.

It seems I need
Prop Shaft-
– tapered roller and race 05066 / 05185
-ball bearing 6205

Drive Shaft
-tapered roller and race 05079 – 05185

The only thing I can’t get to jive on my measurements are the cone widths,
but perhaps I’m measuring wrong. The Timken specs show both cones
.566 wide. One of mine I measure at .600, and the other .625.
I’m going back to the garage to see if I missed something there!

Northumberland wrote:

My lower unit only uses tapered bearings. From your post, yours is different. So speaking about the

Here are the specs for the 05066/05185 cone/cup … https://cad.timken.com/item/tapered-roller-bearings-ts-tapered-single-/tapered-roller-bearings-ts-tapered-single-imperi-2/05066-05185

and here is a link for the specs on all the other sizes available. … https://cad.timken.com/viewitems/tapered-roller-bearings-ts-tapered-single-/tapered-roller-bearings-ts-tapered-single-imperi-2

The next one will let you search for all other types of Timken bearings.

https://cad.timken.com/?_ga=2.138323504.1204381099.1573409853-130771345.1546634794

Good luck!

Prepare to be boarded!