Reply To: Elto Ace Flywheel removal

Home › Forum › Ask A Member › Elto Ace Flywheel removal › Reply To: Elto Ace Flywheel removal

October 23, 2019 at 4:48 am #185768
lyks2tinkr
Participant

    US Member

    I believe the rope plate is the puller on those motors. Put the nut back on, then the plate. Loosen the flywheel nut and tighten it against the rope plate and it should pop off.
    I like to tighten the nut against the plate, and then some light to medium rapid taps with a small brass hammer. Tighten the nut against he plate some more and repeat the rapid taps. It should pop off.