Home › Forum › Ask A Member › substitute for OMC sealer 1000 › Reply To: substitute for OMC sealer 1000
Well Gentlemen,
I have resealed two Gear Cases one with 847 and one with Ultra Black. I have ran the Motor (65 Small Case 18) with the ultra black about 45 Minutes in the lake and no water in the case when I drained the oil. So far so good. One thing I did do before applying the Ultra Black is I cleaned all surfaces and screws with M.E.K to ensure the surfaces and screws were clean and oil free. Then as recommended I applied the sealer and fitted the parts just a little snug. Then came back one hour later and final torqued the case screws. I haven’t ran the Motor with the 847 yet (69 Big Case) and yes the 847 is more cumbersome to work with but not terrible. Anyway thank you for all the replies