Reply To: 7.5hp Evinrude Starter Pullstart Issues

Home › Forum › Ask A Member › 7.5hp Evinrude Starter Pullstart Issues › Reply To: 7.5hp Evinrude Starter Pullstart Issues

October 11, 2019 at 12:19 pm #185026
Good-Fishing
Participant

    When i originally removed it the screw was very tight but the pressure plate underneath holding the rope was a little loose.Leading to a hard start. So I loosened the screw then re tightened it and it wont allow me to pull it with it fully tightened down.