Home › Forum › Ask A Member › substitute for OMC sealer 1000 › Reply To: substitute for OMC sealer 1000
Ben Ditmar, Ben Breitner and Ron Baker were using this, they advised you can remove the hardened stuff and continue using…I have not opened mine yet… but the 847 is still oooozing from the dad gummed puncture…ugh
THAT explains the *cough* in the same line as the “fine gentlemen” 😉😁
I have had to open up the valve on my can before too, but it took two or three months for it to set up that far down. Usually it just hardens in the nozzle and it can be removed with a pin punch or a finish nail or something. I have used both 847 and Ultra Black for gearcases and I much prefer the forgiving nature of the Ultra Black for that application. I have used my 847 for crankcase halves too, but actually prefer Yamabond 4 for that. Nothing wrong with 847 and it works for different applications. There are newer, more specialized sealants available now that I think do a better job for specific things.
-Ben
OldJohnnyRude on YouTube