Reply To: Gearcase flushing procedure prior to Lubriplate 105

Home › Forum › Ask A Member › Gearcase flushing procedure prior to Lubriplate 105 › Reply To: Gearcase flushing procedure prior to Lubriplate 105

September 12, 2019 at 12:27 pm #183187
jeff-register
Participant

    Once you get it clean run some 30wt oil thru it & then redrain, then refill with 105. I use a horse syringe from the feed & tack store. It has a tapered end that fits into the gearcase fill port. If you ever want to change the 105 gently heat the case & it will melt too. The 30wt gets most of the thinning from the solvent removed.