Home › Forum › Ask A Member › 35 Sportfour plug wire orientation › Reply To: 35 Sportfour plug wire orientation
Tubs, I couldn’t make heads or tails of your first post til I looked back at the picture. That spring (which I never knew was laying there and thought it lost) held the little bb bearing ball against the idle screw for tension. The check seems to work ok cuz it’s pumping fuel from the bowl to the face of carb via the primer pump. I can start the motor but then I can ONLY keep it running by pumping the primer. (Ran it for like 10 seconds like this and REALLY smooth at certain points) so that tells me I’m not getting fuel thru the carb to keep it running , it also sneezes and carry’s on if I don’t pump fast enough. I’ve sprayed everything I can see to spray. I’ve heard about running fine wire thru orffices but don’t see how in the world to access all of them. Wish I had a cut sheet of this particular carb so I could understand the flow better. Gonna take it off again and clean some,more. I’m really anxious to get this thing purring like I believe it will
It's a jungle out there.