Reply To: 1968 wizard (Chrysler) 9.2 cooling

Home › Forum › Ask A Member › 1968 wizard (Chrysler) 9.2 cooling › Reply To: 1968 wizard (Chrysler) 9.2 cooling

September 6, 2019 at 11:43 pm #182812
Bob Wight
Participant

    US Member

    I’ve done a couple salt water motors but neither one was clogged that bad. No wonder it wasn’t circulating water. Forget a propane torch on those broken bolts. Use MAP gas or oxy-acetylene if you have it.

    Bob

    1937 Champion D2C Deluxe Lite Twin
    1954 Johnson CD-11
    1955 Johnson QD-16
    1957 Evinrude Fastwin 18
    1957 Evinrude 3022
    1958 Johnson QD-19
    1958 Johnson FD-12
    1959 Johnson QD-20
    1982 Evinrude 25hp

    “Every 20 minute job is only a broken bolt away from a 3-day project.”
    "Every time you remove a broken or seized bolt an angel gets his wings."