Home › Forum › Ask A Member › New Guy! First motor! › Reply To: New Guy! First motor!
August 30, 2019 at 11:09 am
#182305
Yellowstone,
I posted the screw instructions. Many have taken the screws deeper than the threads of the flywheel & destroying a coil underneath. Know the depth of the threads on the flywheel & use all the threads to get a good bite but no deeper please. Sorry for the miscommunication. Measrure the three points of hardware to get the puller level with the flywheel to get a straight pull.
Jim is correct, you need at least grade 6 or 8 1/4 x 20 hardware to stay out of trouble!