Home › Forum › Ask A Member › Johnson TN-28 › Reply To: Johnson TN-28
I don’t know about the spring on the right in the first photo, but the spring on the left looks like the neutral lever spring that mounts to the neutral lever bracket below the tank mounting bracket. Sorry I don’t have a photo, and your photos don’t show the location.
Also I noticed that it looks like your coils are mounted too far inside. The coil heels should be mounted so that the outside surface is exactly parallel with the flat surface on the magneto plate under the heels. This is to get the proper clearance from the heels to the flywheel magnets.for a good hot spark. A metal straight edge held vertical against the coil heel and the vertical flat on the magneto plate will help align the coil heels properly.