Reply To: Johnson TN-28

Home › Forum › Ask A Member › Johnson TN-28 › Reply To: Johnson TN-28

August 26, 2019 at 8:30 pm #182062
Bob Wight
Participant

    US Member

    Looks OK to me. Try putting a piece of masking tape over the exposed ends of the coil laminations, re-install the flywheel and spin it through several revolutions. Then remove the flywheel and look for any rub marks on the masking tape.

    Bob

    1937 Champion D2C Deluxe Lite Twin
    1954 Johnson CD-11
    1955 Johnson QD-16
    1957 Evinrude Fastwin 18
    1957 Evinrude 3022
    1958 Johnson QD-19
    1958 Johnson FD-12
    1959 Johnson QD-20
    1982 Evinrude 25hp

    “Every 20 minute job is only a broken bolt away from a 3-day project.”
    "Every time you remove a broken or seized bolt an angel gets his wings."