Reply To: Pivot pin 57 Johnson 35 HP

Home › Forum › Ask A Member › Pivot pin 57 Johnson 35 HP › Reply To: Pivot pin 57 Johnson 35 HP

August 21, 2019 at 8:28 am #181694
bck1
Participant

    So when I insert the pin and start to screw it in it will only go in at urn and a bit. The pin engages the receiving hole but than stops and will not advance more. I am afraid to attempt to turn the screw more in case I strip the threads. So only about 1/16th of an inch is in the receiver. Could a PO used the wrong pivot screw or could there be a misalignment of the two