Reply To: Decals

[Samuel Phelps]

This is a waterslide decal from American Outboard..
The potential problem I see, because it’s such a large/long decal , would be getting it centered up on the tank .
If you have to start on one end , position , then carefully slide the paper out from under the decal , I could see where
Not getting it centered could be a problem .
My thought is maybe dry fit it in to position .
Then place a piece of blue tape at the ends and top/bottom .
That gives me a starting point that I won’t need to eyeball or think about during actual installation .
Hopefully the decal doesn’t stretch much when wet . It does wrap around all 4 corners of the tank ..