Home › Forum › Ask A Member › 1960 Evinrude 5.5 hp › Re: 1960 Evinrude 5.5 hp
October 3, 2015 at 4:43 am
#25036
You need a rubber based adhesive that holds the spaghetti seal well till you get the tip and screws in place. Remember you are going to take time to line up the shift screw also. You want to cut the spaghetti a little long at the rear seal holder so you form a good seal where that area butts up. You need a good aggressive adhesive that will hold the seal to you get everything in place. 3M 847 is the choice by most!
Dan in TN