Reply To: Single hose fuel connector for OMC – oring replace?

Home › Forum › Ask A Member › Single hose fuel connector for OMC – oring replace? › Reply To: Single hose fuel connector for OMC – oring replace?

July 15, 2019 at 7:49 pm #178948
amuller
Participant

    I measured a few and the male part on the double line connectors is about 0.215″

    The diameter for the single line connectors is about 0.245.

    According to the NAPA/OMB chart posted above: 303598 has an ID of .225, 301824 has an ID of .197. but a -107 ring has an ID of 7/32 which corresponds to 0.219.

    A metric 3 x 5 is close but not identical.

    More than enough to confuse me.