Re: 1960 Evinrude 5.5 hp

Home › Forum › Ask A Member › 1960 Evinrude 5.5 hp › Re: 1960 Evinrude 5.5 hp

October 2, 2015 at 12:26 pm #24989
Buccaneer
Participant

    US Member

    Thanks for the replies. My bushing looks like it would have to
    be removed and installed from the top side.
    Was Frank’s tool a stepped rod inserted from the bottom?
    If so, then the hole in the casing below the bushing would have
    to be bigger that the bushing hole…. will have to check that
    out. Easy enough to turn a rod on the lathe. Thanks!

    Prepare to be boarded!