Home › Forum › Ask A Member › 1960 Evinrude 5.5 hp › Re: 1960 Evinrude 5.5 hp
October 2, 2015 at 9:47 am
#24985
3M 847 is the sealer.
The dog can be flipped. there are a few members that sell NOS dogs very reasonable.
Frank R makes a tool to remove the bushing. Or you can grind down a piece of 5/16" rod, down to about 1/4", over a couple inches. Then use that to drive it out. Or you can tap the end of the pushing, and thread in a bolt and pull it out.