Reply To: Johnson AB 25 Help

[muddog2]

I filled up the bowel and left the pit cock valve open for 10 minutes and no gas leaked out the top. I took the needle valve out and gas ran out of the hole. I took the screws out of the side and pulled the cam out and I took the screw out of the bottom under the spray nozzle and I pushed a wire in the spray nozzle and I could see it through the small holes on the side of the nozzle. i pushed the wire through the small holes on the side of the nozzle. I put everything back together and I rechecked the points and made sure that the points begin to break when the marks on the flywheel and armature plate are lined up. Pulled the rope 5 or 7 times and noticed that gas is leaking from the edge where I took the cam out of carb. Mostly the bottom edge. Is there supposed to be a gasket there? I also noticed that gas is around the rim of the intake. The gas is still not getting to the cylinder heads. Poured 1/2 teaspoon gas in cylinders and it fired when I pulled the rope. Any suggestions.
Thanks, Robert