Reply To: TN 28 total rebuild

[tinkerman]

I think I’m gonna take both halves of the block with the pistons and crank to a machine shop and see if they will assemble it and check clearances . Somethings still not right and I’ve got several $ tied up in parts. Just seems something is too tight and I still havnt torqued the other half of block. I put it in a vise with these bolts snug and put the flywheel on temporarily and pulled with a rope and I’m certain when I torque the bolts down itlll be “too” tight to pull with a rope

It's a jungle out there.