Home › Forum › Ask A Member › 1988 Johnson 9.9 NO spark. › Reply To: 1988 Johnson 9.9 NO spark.
Ok I read the 6 HP post and that sounds VERY possible. I did have that plate off that holds the wires but just checked for chafed wires….never thought about a break. There was a zip tie near that clamp shown in the picture through the mag plate and around the wire harness so… to tight maybe…..broke a wire maybe??? Yes Mumbles I thought that reading should be a stable reading so if it is a broken wire I am down to the two going to the trigger sensor at least. Back to it tomorrow. THANK YOU to all that are taking the time to help me here, just a great place to find intelligent opinion and suggestions. As I said before this motor is GOING TO FIRE sooner….or later.