Re: Evinrude Lightwin problems

[ausob-collector]

CajunCook1, I have done a drop test and it was running so slowly it stopped when I took the plug cap off of either cylinder. Before the reeds were taken off and cleaned, the bottom cylinder wasn’t working but I could feel the jolt of the spark when holding the boot in my pliers while it was running on the top cylinder, which is why I thought the reeds weren’t getting any fuel to that cylinder.
I am running the motor off the gravity feed fuel tank, not an external tank.
It is getting plenty of fuel as I cleaned tank and fuel tap and filter.

Thanks again
BP