Reply To: How to : Evinrude Speeditwin ..

Home › Forum › Ask A Member › How to : Evinrude Speeditwin .. › Reply To: How to : Evinrude Speeditwin ..

June 18, 2019 at 9:46 am #177462
David Bartlett
Participant

    US Member

    Randy gave good advice. Only need a little fuel/oil mix in the cylinders to lubricate things.

    I would pull the flywheel and clean and gap the points, then clean the carb and pull the rope. These are fun motors. Make sure the flywheel is TIGHT!!!!!

    David Bartlett
    Pine Tree Boating Club Chapter

    "I don't fully understand everything I know!"