Reply To: Removing Viking 3.5 Flywheel

Home › Forum › Ask A Member › Removing Viking 3.5 Flywheel › Reply To: Removing Viking 3.5 Flywheel

June 17, 2019 at 8:56 pm #177408
amuller
Participant

    I don’t know anything about Viking motors, but on Wico flywheels used on West Bend, Chrysler, etc I have found that unthreaded holes in the flywheel are common. I suppose people loosened the nut and whacked it.

    I have always threaded the holes and used a puller. You may need a “bottoming” tap to get full depth of threads if he hole is shallow.