Home › Forum › Ask A Member › 2hp Johnnyrude electrical problem › Re: 2hp Johnnyrude electrical problem
😳 Thanks for going to all the trouble Mumbles!
I have replaced the ground strap, and cleaned the bolt and the exhaust cover to ensure good continuity. It checks out fine now and the arcing has stopped.
I have re checked the mag to carb sync, and it is as it should be according to the service manual . It still wont co operate.
I also re checked the compression and it is only 100 psi, not 110 as I stated earlier. I know the info was on the old blue boards, but I will have to ask again here ….
What is acceptable compression on these little fellers ?
It’s kind of humbling that I can’t figure this out. This is probably the simplest motor to work on, so it should be easy right!