Re: ’57 Evinrude Sportwin Ignition Question

Home › Forum › Ask A Member › ’57 Evinrude Sportwin Ignition Question › Re: ’57 Evinrude Sportwin Ignition Question

September 29, 2015 at 12:30 am #24806
chris-p
Participant

    No it can be pulled without opening her up.

    Easiest way by far is with one of the tools. Frank R on this forum makes a superb one.

    Or you can drive a couple sheet metal screws into it and pry out.

    To install, cut a piece of abs pipe or something similar, same or slightly smaller OD as the seal, long enough to slide over crank and tap back in.