Reply To: 1959 fisherman 5.5 help

[JACQUES]

HV pin to either low primary wires (black or green) should show 4-7 kilo ohms if not coil is open inside it could be open anywhere and arc internally during higher RPMS

in theory the faster the magnet fly by the coils the more ” kick” is generated when the fields build up and collapse later this can boost the HV enough for internal arcing

when you solve the problem and in conclusion if a new coil solves your problem you should do some coil surgery . the arcing point should show a blackening surface somewhere inside the coil . The HV pin may just… pull out

btw…. what does your “good coil” give results wise…

Joining AOMCI has priviledges 🙂