Reply To: RD 14 Gears

Home › Forum › Ask A Member › RD 14 Gears › Reply To: RD 14 Gears

April 26, 2019 at 10:33 am #174397
DAN ANDERSON
Participant

    US MEMBER PAY BY CHECK

    Yes the gears can be turned with the forward gear bushing changed. The gears are the same part number from RD-10 thru RD-19, with only the pinion gear changing on the RD-19. I have changed several. I built a shoulder press tool to use with the arbor shaft from my bearing race kit. Works well! The bushing is not that hard to press, just need to be careful with the bushing as you will be using it again.

    Dan in TN