Home › Forum › Ask A Member › Johnson Outboard Motor › Reply To: Johnson Outboard Motor
Well, it would surely make a lovely decorative piece as well, perhaps in a man cave or den area. Just remove the plugs add some oil to the cylinders then crank the engine over to spread it around. Do a nice wax job to the hood, try to avoid the decals though. Be very careful with the plastic emblem on the front of the hood, it is easily cracked and hard to find.
If the inside of the tank is in good shape, add some two stroke/lightweight oil inside and swish it around. Do not store the tank on a concrete/cement floor, hold it off the ground with a couple of short 2x4s. Use some of the oil on a rag to apply a protective coating to the outside of the tank.