Reply To: Johnson TD Project

Home › Forum › Ask A Member › Johnson TD Project › Reply To: Johnson TD Project

March 11, 2019 at 5:35 pm #170975
LLOYD LAUTNER
Participant

    US MEMBER PAY BY CHECK

    Buccaneer has covered it. They need 70-75 psi to idle nice. Highest I have ever measured on those models is about 77 psi. And as he stated, make sure the rings are not stuck from sitting a long time. Use a lot of penetrating oil and warm up the block while rotating the crank forward and backwards. This may free the rings without disassembly.