Reply To: Oily flywheel

Home › Forum › Ask A Member › Oily flywheel › Reply To: Oily flywheel

March 1, 2019 at 9:14 pm #170019
Bob Wight
Participant

    US Member

    Dale – thanks. The first thing I looked for after pulling the flywheel was any oil leakage at the top of the crank and the slinger area was completely dry, no oily mess at all. Even so, I made sure the oil passages were clear while reassembling.

    Good luck with your motor mix and match project!

    Bob

    1937 Champion D2C Deluxe Lite Twin
    1954 Johnson CD-11
    1955 Johnson QD-16
    1957 Evinrude Fastwin 18
    1957 Evinrude 3022
    1958 Johnson QD-19
    1958 Johnson FD-12
    1959 Johnson QD-20
    1982 Evinrude 25hp

    “Every 20 minute job is only a broken bolt away from a 3-day project.”
    "Every time you remove a broken or seized bolt an angel gets his wings."